Other Controls
PolAIR™ 400HC Unit
The PolAIR™ 400HC is designed to control and regulate the PolAIR™ High Pressure Fog System by temperature and humidity. The 400HC can be configured for single or two stage / zone operation. Specifically designed for the PolAIR™ System, the 400HC includes the motor starter, motor thermal overloads, inputs for 2 temperature and 2 humidity sensors, single or two stage / zone cooling and humidification capabilities.
PolAIR™ 400HC UnitPolAIR™ Sequence Panel
The PolAIR Sequence Panel includes automatic relay contacts for interfacing control devices like the PolAIR 400TC Time Controller and other activation devices such as computerized control systems or in house plant DCS networks. The Sequence Panel includes real-time monitoring and alarming of the motor thermal overloads, sequencing of the inlet water supply and pump drain solenoid. Pump run time is maintained in the sequence panel for up to 32,000 hours and an on board system maintenance meter is provided. There are also built in delays for the inlet water supply to assure that the pump starts with a full head of water. It just really can't get any easier!
PolAIR™ Sequence PanelAccessories
ThermoTRAC™ Model 7000 Backup Control
A rugged, independent control that automatically takes over in case of a primary system failure. Loaded with features and capabilities that enable it to perform all critical equipment operations to maintain a proper house environment. May also be used as a contactor panel or as an economical stand-alone control.
ThermoTRAC™ Model 7000Vari-Speed Station
Up to 5 stations can be added to the GainTRAC™ 3200 and 1600 controls. Each station provides two variable speed output channels. Fans may be run on time cycles or ramped up to maximum speed as temperature rises. Equipped with manual override.
Vari-Speed StationStatic Pressure Sensor
Compares inside and outside air pressure and controls position of inlets to maintain a programmed static pressure setting. If sensor readings exceed acceptable limits, the GainTRAC™ control will generate an alarm condition.
Static Pressure SensorDeadBolt™ Lightning/Surge Arrestor
Effectively protects equipment from lightning damage. Available in 3 models for power circuits, telephone lines and data lines.
DeadBolt™